Відео

Six-years later, your information is still perfect. --- Thanks for the great upload. ---

Price bro

How many bails to a roll of net wrap ?

The Dewit half moon hoe looks great. When attaching the hard ash handle using the supplied screw, the screw stripped even though I was being as careful as I could be. I finally found an Everbuilt #8 x 3/4" round head phillips zinc wood screw at a big box store. I couldn't find a stainless screw but was leaning in that direction even though they are weaker. While inserting the new screw, the screw broke off inside the handle. I think I will use it without a screw for now as it seems firmly attached without one. If the handle does come off, I'll drill out the old screw and try again. I do recommend drilling a pilot hole on those Dewit handles.

Is there anything else that could trigger the wrapper? I checked the lever dealy and it slides fine. Ours prematurely wraps and doesn't shut off until pulling the lever manually. Its an intermittent but debilitating problem!

Thanks for the video.I did something wrong on hooking up the spring... when I push the choke closed it races like crazy.. I bought a cheap Chinese carburetor to replace the one that was on there,it doesn't have that little side sediment bowl . I was told it's not needed.. my motor is for a pressure washer

I think the correct German name for that tool is a 'Karst'. It's used in vineyards which are very rocky and narrow between the rows to airate and plant new plants. Great tool, as you said mostly for rocky ground. For softer grounds there are 'Haue' which are the same tool, but with a narrow spade instead of forks. Great for turning ground and planting.

11:03 that square bar behind the roller gets snagged on things in reverse. It should be a round pipe.

- There was a trailer drawbar device on '?? New inventors? or something in Australia (ABC) 20 odd years ago with a"jointed drawbar" - ie, just -sort of - like yours. To reverse the trailer straight, or around a corner, it took the same inputs as simply backing the car, Their system used 2 gas struts pushing off the rear bumper of the car (or a bar connected to the sides of the trailer hitch, operation the same, add a link, reverse the steering input needed..

Its certainly going to be cheaper than a new broardfork

You use the large muscles of your legs and your body weight to leverage the broad fork. You use weaker, although not necessarily weak, upper body muscles for the swing fork, plus the shock of that fork hitting the ground is transferred to your upper body. It’s a lot more work, which you may not realize when you are younger. Years from now you will realize the difference. I’m 78 and can still use a broad fork with ease. Swinging a tool into the ground/wood repeatedly will quickly give me a very sore back and shoulders. Why I went a hydraulic log splitter and retired the splitting mail years ago.

When I was young, we used the swing fork to open potato hills and carrot beds and the like, working across the bed then pulling it to you. In our wet, stony ground it worked much better than the conventional 'digging fork', which was inclined to plug and harder to sink in. I'll happily attest to the excellence of the hand tools I've bought from you- *much* better than anything available to me locally, and well worth the cost- they are 'heirloom quality'.

We need to order a few next order.

That's a good broadfork. We cover a lot of ground with it.

Great job. I really appreciate it.

Joel, I'm getting ready to use mine for the first time! It looks like Carrabaggi has an adjustment bar on the gear side of the unit. Maybe it can run a little deeper. Anyway, I will see how it goes!

Quality video as always.

I'm looking for info on grillo tine replacement. Have sent 2 emails, no response.

Thanks so easy to understand 👍👍

Great info video, but the camera person needs lessons.

This tool is not used in europe in flat terrain. It is used to push the hay downhill to the point where you can pick it up with a tractor. This is old tool, replaced by hayrakes, like for example Lavrih AlpFlow. But these are much more expensive and used farmers with alot of steep slopes.

My local Honda dealer sold me a brand new starter for about $13 for my 2010 HRR216.

Thanks for the information on how to replace the recoil starter roup for Honda GP 160, Namibia 🇳🇦

Joel is THE MAN.

I just bought an older BCS which not only has a frozen clutch, but also the old Acme ALN330WB has no compression. This video helps solve one problem, and I will be contacting you folks soon to have you sell me one of those Kohler CH395s you have advertised on your website to repower it. :)

Excellent video. Similar tools, but different. I know the video you're referencing by Curtis Stone, ua-cam.com/video/Js0MXh4PoRY/v-deo.html&t and to be fair, he has a unique situation where the PDR tool works great for him. Curtis only uses one implement on the BCS and because of that he has removed the quick coupler which changes the weight distribution. For his situation, he essentially created a multi-tool which speeds up his work. If you are able to have both tools I think that's great, but if you could only have one, I think you'd have to go with the tiller and roller (either the earth tools one or the PDR).

Know this is a old video. I have a predator 420 motor, and the pull cord is near the air filter, so is pulls to the left of the machine, can I unbolt this and rotate it so i can pull start it to the right?

Thank you. Extremely helpful.

What is there isn’t a screw hole? Tia

Excellent explanation. Thank you.

Help! I can't get my clutch off the motor

Are these straw choppers able to handle freshly cut loose hay, which has not been dried out in the field? Or must the hay be dried prior to being shredded? I'm interested in using the BCS with a sickle bar mower, buck rake, and shredder as the basis of our garden's fertility program.

Please l need lornbardini engine

That was explained incredibly clearly. Thank you. You mentioned all the thoughts that ran through my head for a moment when mine was stuck! Makes total sense now why the rubber bump is semicircular.

What do you use to shred first?

Great video. Thanks for posting.

Are the carburetors interchangeable on all the gx series engines?

I have been looking for a stud removal/install tool... I completely forgot... I've used this method, many times in fact, lol. Apparently my brain has stopped working. Anyway thanks for the bid and reminder. I probably would've kept looking for and bought a tool needlessly.

WTF how hard can it be to correct your guide to say no dip stick and what oil to use. Most of the guide is in languages I don’t speak what a waste of paper.

I'm working (DIY) on an exhaust manifold. Your demonstration has helped me a lot. Thanks for such a clear explanation.

Thank you...

I ordered a new coil and still no spark. Nothing. Any idea? I disconnected the prim coil and also no spark. I can not find any resistance for the prim coil , also not on the new one. The secondary is 4,5 kohm. I'm out of options. Only thing I can imangine is that the new coil is also bad.

Somebody know the right Nm torque value for engine and powersafe oil bolt? Sorry for my eng

@EarthTools. Love your videos. Maybe you could do one on general maintenance and adjustments to the various controls too, such as throttle, hand brakes etc.

Never thought I'd be the type of dude who could remove a clutch and repair it. You made it so easy! Thank you.

Do you have any info on replacing the axel seal?

Thank you! Excellent explanation!

Hello, I have been following information on this BCS 2 wheel tractor. Wr just looked at a used one sort of nearby us for sale. On our way to look at the tractor, I read your 12 page history of BCS, Earth tools, Grillo etc. Very interesting! Maybe you could guide us to someone up here in Northern Illinois?

I will be ordering one soon

Thank you my dog ate the rope and broke the handle